YOU ARE THE WHEEL MAN PC Racing Game Full Version
Processor= 400MHz
RAM= 128MB
Graphics Card= 16MB
DESKTOP TRICKS
Unclick-able desktop
Allright, this one is really old but sometimes users will not know what happened. Just make a screenshot of your desktop by pressing "Print Screen" on your keyboard (sometimes shown as "Print Scrn"). Now go to Paint and Paste (Ctrl+V). You should now have an image of your desktop. Save the image to your PC (not on your desktop) and save it as BMP. You'll now have the file like this:C:/Desktop.bmp.
Next, right-click on your desktop and select Properties. Select the tab Desktop and click Browse... Navigate to your screenshot and press OK to set it as your background. You're almost done now.
Right-click your desktop again and navigate to "Arrange icons by" and uncheck "Show desktop icons". There you have it, the icons on the desktop can not be clicked anymore.Desktop upside down
Do you still have the image from the previous prank? Open it again in Paint. Now rotate the image (Ctrl+R) and set it to 180 degrees. Save to file again as BMP, like this:C:/Potksed.bmp.
Now set the image again as your background and there you have it: Your desktop is turned upside down. But wait: The taskbar at the bottom is still there? Right-click on it and select Properties. On the Taskbar tab, select the Auto-hide the taskbar check box. Press OK to save the changes.
Play movie on paint .......
play movie on microsoft paint
simple first hit the print screen button on the keyboard
when then media files are playing then open paint and
paste by pressing ctrl+v (paste key) voila
the movie starts on the paint application
How to Restart Windows without Restarting your PC
When you click on the SHUTDOWN button,
make sure to simultaneous press SHIFT Button.If you hold the Shift key down while clicking on SHUTDOWN button,
you computer would restart without restarting the Computer.
This is equivalent to term "HOT REBOOT".
Now you can open them fast!!!
Some shortcuts for Windows XP users!!
Press
'Windows key' + R and type the following (without qoutes) :
"winword" to open Word.
"powerpnt" to open Powerpoint.
"excel" to open Excel "mspaint" to open Paint.
"notepad" to open Notepad.
"wmplayer" to open Windows Media Player.
"wordpad" to open Wordpad.
"sndrec32" to open Sound Recorder.
"iexplore" to open Internet Explorer.
"firefox" to open Firefox.
"msconfig" to control startup.
"services.msc" to manage the Services.
Press
'Windows key' + R and type the following (without qoutes) :
"winword" to open Word.
"powerpnt" to open Powerpoint.
"excel" to open Excel "mspaint" to open Paint.
"notepad" to open Notepad.
"wmplayer" to open Windows Media Player.
"wordpad" to open Wordpad.
"sndrec32" to open Sound Recorder.
"iexplore" to open Internet Explorer.
"firefox" to open Firefox.
"msconfig" to control startup.
"services.msc" to manage the Services.
StarWars Movie in Command Prompt
Just type in
telnet towel.blinkenlights.nl
in the 'Run' command and
watch the episode!
background movieeeeeee
This tweak will launch WindowsMediaPlayer with the 'AboveNormal'
priority setting when opening a mediafile. Having trouble watching a
movie when you also have a lot of background processes going on? Here's
what to do: 1. Create a new textfile in the root of c:\, but instead of
giving it the .txt extension you name it wmp_AboveNormal.bat 2.
Right-click this file and choose 'Edit', you'll see it'll open notepad.
Put this line in: start /AboveNormal C:\"Program Files"\"Windows Media
Player"\wmplayer.exe %1 %* 3. Save (make sure you save it as .bat, not
as .txt) and close. Now all you have to do is register your mediafiles
to this batchfile. Here's how to do that: 4. In Windows Explorer choose
Tools>Folder Options >File Types 5. Scroll down(press A) to the
AVI filetype 6. Click 'Change' and point to c:\wmp_AboveNormal.bat .
Click OK and Close. Now everytime you dubbleclick an .avi WMP will open
with the 'AboveNormal' -priority setting ! (Repeat steps 4-6 to register
all mediatypes you want to be opened this way.)
Try to LOCK ur folder wit out S/W method 1
To hide a a folder name
"d:\game"
GO TO CMD PROMPT :
type in "d:\attrib game +s +h "
2 unlck the hide :
type in "d:\attrib game -s -h "
"d:\game"
GO TO CMD PROMPT :
type in "d:\attrib game +s +h "
2 unlck the hide :
type in "d:\attrib game -s -h "
Make your wndows Xp GENUINE.!!
This will allow you to bypass the Microsoft Genuine Validation thingythis method works better than many others i've tried before.
forget the cracks and injectors etc... this is the BEST WAY:
1) start > run > "regedit" (without the quotes of course)
2) go to the key:HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows NT\CurrentVersion\WPAEvents\OOBETimer...and doubleclick on it.
Then change some of the value data to ANYTHING ELSE...delete some, add some letters, I don't care...just change it!now close out regedit.
3) go to start > run > "%systemroot%\system32\oobe\msoobe.exe /a" (again, dont type the quotes)
4) the activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.
Now you can dl all the updates without activating,
and the Genuine Microsoft Validation thingy won't bug you no more!!
Works with most WinXP versions though ther r some exceptions...
forget the cracks and injectors etc... this is the BEST WAY:
1) start > run > "regedit" (without the quotes of course)
2) go to the key:HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows NT\CurrentVersion\WPAEvents\OOBETimer...and doubleclick on it.
Then change some of the value data to ANYTHING ELSE...delete some, add some letters, I don't care...just change it!now close out regedit.
3) go to start > run > "%systemroot%\system32\oobe\msoobe.exe /a" (again, dont type the quotes)
4) the activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.
Now you can dl all the updates without activating,
and the Genuine Microsoft Validation thingy won't bug you no more!!
Works with most WinXP versions though ther r some exceptions...
Make frnds scare for VIRUS
Open notepad and type this:
lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning")
Then save it as Virus.VBS
and go to the folder that contains it and open it if a window pops out saying a virus has been detected it's working. Press yes or no to close the window and put it in the startup folder of the victim's account.
On startup the window should appear.
Note: This does not harm your computer as it does not contain virus.
The Yes and no button does not do anything except closing the window. And you can edit the virus in the sentence: Warning a virus has detected on your PC to any kind of virus eg.Trojan Horse like this lol=msgbox ("Warning a Trojan horse has been detected on your PC. Press YES to format your hard disk now or press NO to format format your hard disk after system reboot",20,"Warning")
Oh in between make sure your victim does not panic and really reformat his harddisk. hahaha :) 35
lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning")
Then save it as Virus.VBS
and go to the folder that contains it and open it if a window pops out saying a virus has been detected it's working. Press yes or no to close the window and put it in the startup folder of the victim's account.
On startup the window should appear.
Note: This does not harm your computer as it does not contain virus.
The Yes and no button does not do anything except closing the window. And you can edit the virus in the sentence: Warning a virus has detected on your PC to any kind of virus eg.Trojan Horse like this lol=msgbox ("Warning a Trojan horse has been detected on your PC. Press YES to format your hard disk now or press NO to format format your hard disk after system reboot",20,"Warning")
Oh in between make sure your victim does not panic and really reformat his harddisk. hahaha :) 35
Password protected folders with & with out SOFTWARE
folder lock with software
click here
http://www.esnips.com/doc/7f993235-e6dc-4ccc-b107-7ee46b69f793/pc-security(reg)
now just download it and make it full version by the side txt files key....
.................................................
folder lock without software
1
If you have a log in password for your account, this can be used to protect folders from other users. Your hard drive must be f
ormatted using NTFS (which it probably is unless you're dual booting with another operating system). Here's what to do...
Right-click the folder that you want to make private and choose "Properties"
(or Alt+Double-click). Go to the "Sharing" tab and check the "Make this folder private" box.
Click Apply . If you do not have a password on your account, a box will pop up asking if you want to assign a password. This must be done if you want to make the folder private, so click Yes . You will need to use your password to log on to your computer from then on.
Type in a password then confirm it. Click the "Create Password" button then close the Password window.
Click OK in the Properties dialog box.
Now anyone else logged on to your computer can't access that file without knowing your password.
-----------------------------------------------------------------------------------
2
if ur folder is zipped then directly u can open the file in it and see .... ADD A PASSWORD
and confirm ur password and it ll b safe
-----------------------------------------------------------------------------------
click here
http://www.esnips.com/doc/7f993235-e6dc-4ccc-b107-7ee46b69f793/pc-security(reg)
now just download it and make it full version by the side txt files key....
.................................................
folder lock without software
1
If you have a log in password for your account, this can be used to protect folders from other users. Your hard drive must be f
ormatted using NTFS (which it probably is unless you're dual booting with another operating system). Here's what to do...
Right-click the folder that you want to make private and choose "Properties"
(or Alt+Double-click). Go to the "Sharing" tab and check the "Make this folder private" box.
Click Apply . If you do not have a password on your account, a box will pop up asking if you want to assign a password. This must be done if you want to make the folder private, so click Yes . You will need to use your password to log on to your computer from then on.
Type in a password then confirm it. Click the "Create Password" button then close the Password window.
Click OK in the Properties dialog box.
Now anyone else logged on to your computer can't access that file without knowing your password.
-----------------------------------------------------------------------------------
2
if ur folder is zipped then directly u can open the file in it and see .... ADD A PASSWORD
and confirm ur password and it ll b safe
-----------------------------------------------------------------------------------
Better BACKGROUND for Microsoft Documentation..
We hav white backgrond for our doc........... as default... but v can hav a blue also.... lets hav a view
1.) Open a Word Document by going to Start, All Programs, Microsoft Word.
2.) From the menu bar, click Tools.
3.) Select Options from the drop down menu.
4.) The Options dialogue box will open. Select the General tab.
5.) Now you will find a check box that says "Blue background, white text." Click to select it so that you have a tick mark on the box.
6.) Click OK to save the changes and to close the options dialogue box.
Now, go back to your Word document. See the difference?
Yes, now it has a blue background and when you type, the text will be all white. Try this for a few days and you should see a drastic change on the eye strain you've been experiencing.
Try this for yourself and feel the difference!
1.) Open a Word Document by going to Start, All Programs, Microsoft Word.
2.) From the menu bar, click Tools.
3.) Select Options from the drop down menu.
4.) The Options dialogue box will open. Select the General tab.
5.) Now you will find a check box that says "Blue background, white text." Click to select it so that you have a tick mark on the box.
6.) Click OK to save the changes and to close the options dialogue box.
Now, go back to your Word document. See the difference?
Yes, now it has a blue background and when you type, the text will be all white. Try this for a few days and you should see a drastic change on the eye strain you've been experiencing.
Try this for yourself and feel the difference!
Create Your Own Logon Message
1 Click start
click run
type regedit,
then click ok!
2 In The registry editor, drill down to the following key:
hklm\software\Microsoft\Windows NT\Current version\Winlogon.
3 Right click LegalNoticeCaption,
click modify,
Type: THIS IS NEXT TRICK,and then click ok!
4 Right click legalNoticeText,
click modify, and then Close your message!
5 Restart Your Computer.
6 The message will appear every time you logon!
click run
type regedit,
then click ok!
2 In The registry editor, drill down to the following key:
hklm\software\Microsoft\Windows NT\Current version\Winlogon.
3 Right click LegalNoticeCaption,
click modify,
Type: THIS IS NEXT TRICK,and then click ok!
4 Right click legalNoticeText,
click modify, and then Close your message!
5 Restart Your Computer.
6 The message will appear every time you logon!
Create A Hidden User Account
Create A Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000. #[Start] [Run] [Regedit]#Registry Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList#Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.#Data Type: REG_DWORD [Dword Value] // Value Name: Type Name of Account to be Hidden#Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]#Exit Registry and Reboot...
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000. #[Start] [Run] [Regedit]#Registry Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList#Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.#Data Type: REG_DWORD [Dword Value] // Value Name: Type Name of Account to be Hidden#Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]#Exit Registry and Reboot...
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups
Trick to Show ur name after time in taskbar...
Hi freinds !
I m here to tell u a trick to add up ur name in place of AM and PM beside time and make urself to feel proud among ur group of frnds.
Its simple
Start -> Control Pannel -> Regional and LAnguage option -> Customize (beside English US) -> Go to TIME tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
IS it changed ??? Might be not ...Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time chnges in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK and be HAPPY 8)
I m here to tell u a trick to add up ur name in place of AM and PM beside time and make urself to feel proud among ur group of frnds.
Its simple
Start -> Control Pannel -> Regional and LAnguage option -> Customize (beside English US) -> Go to TIME tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
IS it changed ??? Might be not ...Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time chnges in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK and be HAPPY 8)
Add Your Name (or) Application to right click Of My Computer
Caution ..
As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk
To write your name on right click application
please follow the steps.1.Copy/Paste the following code in Notepad And then Save it as .reg
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Your Name Or Name of the Application"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"
2.Now edit it and then Type your name In
Eg:
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="trixup" 3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In:
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"
For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .
------------------------------------------------------------
To add Application Control Panel
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]
@="rundll32.exe shell32.dll,Control_RunDLL"
To add Application Add/Remove
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]
@="control appwiz.cpl"
To add Application Reboot
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]
@="shutdown -r -f -t 5"
To add Application Shutdown
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]
@="shutdown -s -f -t 5"
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-....-......----..--.-...--.-..-
As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk
To write your name on right click application
please follow the steps.1.Copy/Paste the following code in Notepad And then Save it as .reg
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Your Name Or Name of the Application"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"
2.Now edit it and then Type your name In
Eg:
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="trixup" 3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In:
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"
For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .
------------------------------------------------------------
To add Application Control Panel
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]
@="rundll32.exe shell32.dll,Control_RunDLL"
To add Application Add/Remove
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]
@="control appwiz.cpl"
To add Application Reboot
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]
@="shutdown -r -f -t 5"
To add Application Shutdown
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]
@="shutdown -s -f -t 5"
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-....-......----..--.-...--.-..-
How to "Delete administrator Password" without any software
Method 1
Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.
Method 2
Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)
Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.
Method 2
Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)
All (Ctrl+Alt+Del) Permanently deleted files Recovery solution
Sometimes we delete the files permanently, and realize that deleting them is like a Blunder...
For all those folks,
Here is the solution
Software called "Kissass Undelete" , can bring those files from the hard disk or your flash drive.
Conditions
: Only if the data on that drive is not re-occupied(or written). that
means the space which was available after the deletion is not been
occupied after the deletion.
Click Here to download the .
1)
To start searching for the files,
Select the drive from the Left panel of the Windows and Click the scan button.
the Scan might take upto 10 secs.
2)
When
the files search has been completed, it will show you the results with
the name, typ, size and the last modified date of the searched file.
3)
Now you can select the file to be recover. This is an Open source
application and available for All Windows OS(Windows XP/Vista/ 7).
How to Create Folder "CON"
Ever tried to create a folder "CON" or "AUX" or "NUL".
Tried now??? - not working :)
Here you go, a simple method to stop your anxiety
Rename folder from the right click option........
Now press alt and press 255...
press 255 frm the right side of the key bords i.e, Num pad.
where only numbers are given.....
now write con and then press enter.....yayyy!!
you ll see a con folder in ur pc
and also you can delete it easily.
Tried now??? - not working :)
Here you go, a simple method to stop your anxiety
Rename folder from the right click option........
Now press alt and press 255...
press 255 frm the right side of the key bords i.e, Num pad.
where only numbers are given.....
now write con and then press enter.....yayyy!!
you ll see a con folder in ur pc
and also you can delete it easily.
Increase your dial up speed to 115.2 kbps
This Trick is the BEST of All on the whole net.I tested in my pc and works great.
Right click :- My Computer - Properties - Click the "Hardware" tab -Device manager -Modems - Right click your Modem -Properties- Click the advanced tab-In the extra initialization commands box type the following code
AT&FX
Reboot your Computer and connect .Your Speed NOW will be 115.2 kbps
Right click :- My Computer - Properties - Click the "Hardware" tab -Device manager -Modems - Right click your Modem -Properties- Click the advanced tab-In the extra initialization commands box type the following code
AT&FX
Reboot your Computer and connect .Your Speed NOW will be 115.2 kbps
Keyboard Tricks
Alt Key + Calculator Number = Symbol.
To create the ® symbol Alt + 0174 = ®
Alt Key + Number = Symbol
130 = é [accent over e ]
0176 = ° [degrees for Temperature]
0169 = © [Copyright]
0174 = ® [Registered Trademark]
0153 = ™ [Trade Mark]
155 = ¢ [cent sign]
156 = £ [Pound Sterling]
0165 = ¥ [Japanese Yen sign]
0128 = € [Euro symbol]
0190 = ¾
171 = ½
172 = ¼
21 = §
144 = É [Capitalised accent over E]
241 = ±
246 = ÷
174 = «
175 = »
225 = ß
135 = ç
137 = ë
132 = ä
160 = á
133 = à
136 = ê
15 = ¤
170 = ¬
159 = ƒ
146 = Æ
145 = æ
129 = ü
253 = ² [Square sign]
350 = ^
352 = `
382 = ~
166 = ª
254 = ¦
249 = ·
152 = ÿ
142 = Ä
154 = Ü
230 = µ
0134 = † [dagger sign]
20 = ¶
195 = +
194 = -
168 = ¿
197 = +
0179 = ³ [cubic sign]
0161 = ¡
Have fun
To create the ® symbol Alt + 0174 = ®
Alt Key + Number = Symbol
130 = é [accent over e ]
0176 = ° [degrees for Temperature]
0169 = © [Copyright]
0174 = ® [Registered Trademark]
0153 = ™ [Trade Mark]
155 = ¢ [cent sign]
156 = £ [Pound Sterling]
0165 = ¥ [Japanese Yen sign]
0128 = € [Euro symbol]
0190 = ¾
171 = ½
172 = ¼
21 = §
144 = É [Capitalised accent over E]
241 = ±
246 = ÷
174 = «
175 = »
225 = ß
135 = ç
137 = ë
132 = ä
160 = á
133 = à
136 = ê
15 = ¤
170 = ¬
159 = ƒ
146 = Æ
145 = æ
129 = ü
253 = ² [Square sign]
350 = ^
352 = `
382 = ~
166 = ª
254 = ¦
249 = ·
152 = ÿ
142 = Ä
154 = Ü
230 = µ
0134 = † [dagger sign]
20 = ¶
195 = +
194 = -
168 = ¿
197 = +
0179 = ³ [cubic sign]
0161 = ¡
Have fun
TURN ON UR PC IN JUST 10 SECONDS
Alright so u wanna know how to turn the pc on in
10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds
Click on the start button then press R it will take u to Run well go to run
& type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentContro lSet\Contr ol\ContentIndex
now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result
Click on the start button then press R it will take u to Run well go to run
& type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentContro lSet\Contr ol\ContentIndex
now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result
Fire Lines Photoshop Tutorial
01
For this tutorial your going to need a good stock photo lined up. Something with action…and preferably dark (this effect works much better in a dark setting)
02
Open the stock photo, then go to the paths tab and click create new path.Press “P” on the keyboard to select the pen tool, Get a basic idea of where the fire is going. Keep in mind dimension and action. Swirls do wonders!
03
A. Click to start your pathB. Click your next point, hold and drag to create a bezier spline path, which is necessary to create flowing lines
C. Continue doing this, following the idea of where you want the fire to go.
Dont worry about getting it right the first time as you can change the spline at any time…another little tip – if you press and hold ctrl while using the pen tool you can temporarily access the direct selection tool which will allow you to edit the spline (a big time saver)
04
And eventually…you get something like what i have below. Remember that your only going to use the parts of your path that are in front of the object your path follows…in this case the models arm, and leg. So don’t waste time trying to make the hidden parts look pretty.
05
A. Now you want to select a soft round brush (i used a 5 pixel brush here) and pick an orange color.B. Make a new layer and name it Fire.
C. Go back to the paths tab and select stroke path with brush.
06
You should immediately see the stroked path.On mine you’ll see splatters and flairs that weren’t part of the original path. Those give the fire line the illusion that it is moving, and were accomplished by simply grabbing the clone stamp tool – using a spatter brush and cloning/stamping areas of the path at random.
07
Mask/erase the parts of the path that are behind the legs/arms or whatever it is your paths follows.08
Right click on the Fire layer and select blending options, and use these options/values.You might end up with something better!
09
Duplicate the Fire layer, and set the layer mode to OVERLAYClick the eye next to inner shadow and inner glow on the duplicate layer to deactivate them.
10
Now double click on outer glow on the duplicate and change the values to this.
Conclusion
Spend a little time, and you can make something like what i have below…For a different effect, duplicate the FIRE layer again, and filter>distort>wave.
Play with the opacity levels, and play with the blending modes – particularly OVERLAY.
Good luck!
Dramatic Text on Fire Effect in Photoshop
Part 1— The Background
So create a new document in Photoshop at 1920px wide x 1200px high, and with the Gradient Tool (G), draw in a radial gradient of browns (#5c3d09 to #1f1409) so you get something like what is shown below.Notice that the gradient is not centered vertically but sits toward the top. In this image we want the top of the text to be on fire, so the top part of the image should be a bit more lit up.
Step 2
As in the grass text tutorial, once again we’re going to have a textured background. But rather than starting from scratch, I just copied the background from the previous tutorial, merged all the layers and desaturated to get what you see below.If you need to make this from scratch, first visit Bittbox to get the original paper textures and then follow the previous tutorial’s steps.
Step 3
Now we set the layer to Overlay and to blend the texture into the background and voila!
Step 4
Just to add a bit more texture though, let’s run the Texturizer filter. To do this, create a new layer and fill it with a brown/beige color—#66500f. Then go to Filter > Texture > Texturizer and use the Canvas texture with 80% Scaling and Relief set to 4.
Step 5
Once you have your texturized layer, set that to Overlay. This adds some extra fine detail to our texture which is good because we’re working on such a big canvas.
Step 6
Next we’re going to apply a layer to slightly desaturate the bottom half of the image. This is so that the top looks like it has a warmer glow where the flames are, while the bottom looks a little colder.So create a new layer and fill it with the color #4b4f3b. Then add a layer mask with a gradient to mask out the top and fade down (so you get the effect shown).
Now set the layer to Color and 45% Opacity.
Part 2—Text + Glow = Awesomeness
OK, we now have a nice background! So let’s add some text. I’ve used the font Trajan because it’s a really dramatic looking font. Here I’ve placed the text in the color #cb9328, then set it to Linear Dodge (Add) with an Opacity of 8%.What we’re going to be doing with our text is making it look like the top half of the text is coming out of the background and is red hot with flames flickering off. This means we’re going to run a lot of effects and apply layer masks to them so that only the top half shows while the bottom half reverts to faded out text like we have currently.
Step 8
So first create a new layer group to put all the text layers in—because there will be a lot of them.Then duplicate the text layer and set the color of the duplicate text to #5e3f1c.
Step 9
Now set the newest text layer to Overlay and 70% Opacity. It should look kind of reddish (as shown below).
Step 10
Now duplicate the text again and set the latest duplicate to a yellowish color—#cb9328. Then set this to Linear Dodge (Add) and Opacity 30%.Next we add a layer mask and draw a gradient so the latest text layer fades out as shown below, and beneath you can see the reddish colored combination of the bottom two text layers.
Step 11
Next we duplicate the text layer yet again, but put this layer right on the bottom. Set the color to black—#000000. Then go to Filter > Blur > Gaussian Blur and it will ask you to rasterize the text, click yes to that, and then set the Radius to about 4px.Then Ctrl-click any of the other text layers and go back to the black layer and hit delete so you are just left with a sort of shadow. Then duplicate this layer and merge it with the first so the effect is heavier. You should have something that looks like the screenshot below.
Step 12
Once again, add a layer mask so the shadow quickly fades out as shown. This makes it look like the text is coming out of the page.
Step 13
Now duplicate our black layer again and using the Smudge Tool (R) and a largish soft brush you want to just smudge the shadow around so it looks like burn marks.
Step 14
Here’s how our text is looking now. I actually created two sets of "burn" marks, and then four sets of the shadow layer each blurred a little more than the last and each faded back.
Step 15
Now it’s time to make the top part of our text glow. So first of all, duplicate the text layer again and place this layer at the very top and set it to a yellow color—#dc9a08.Then run a Filter > Blur > Gaussian Blur over it with Radius of 8px. Then grab a large soft eraser brush and just erase away parts at the bottom so it’s kind of uneven.
Step 16
Set our first glow layer to Soft Light. You might want to repeat the process, erasing even more so the top part is even glowier.
Step 17
Now duplicate the text layer yet again and place this at the very top. This one should be again the same yellow (#dc9a08).Then go to Layer > Rasterize > Type and turn the text into a flat graphic. Then Ctrl-click the layer and go to Select > Modify > Contract and use a value of 1px. Then press Delete to delete everything except that 1px outline.
Step 18Now set the 1px layer to Overlay, and you should have something like the image below.
Step 19
Now to our 1px glow add a layer mask to fade it out down the bottom as we’ve been doing with the other layers.Then duplicate the layer, and run a Filter > Blur > Gaussian Blur set to 1px. Then duplicate this layer again and blur it by 2px. Then duplicate the layer again and blur it by 4px.
The idea is that we want the edges of the text to look red-hot with it fading in to an overall hot glow on the text.
Step 20
Next we duplicate all four of the glow layers and merge them together. This should result in a layer on top which is the original bright yellow.Grab the Smudge Tool and run over the text, smudging it up to look like heat waves coming off the text, as shown.
Step 21
Now set this latest layer to Overlay and you should have something looking like this!
Step 22
Now we’ve pretty much finished our text. I went through and duplicated some of the glow layers to make it look even more fiery. Feel free to experiment with getting a real red-hot glow look by doing so.
Step 23
Next, in keeping with the last wallpaper, I’ve gone and added a quote underneath my main text. This provides a nice embellishment to the page. Try to use colors that fit in with the background and text layer so it doesn’t stand out too much, because we really want this to be a secondary element to the main text. I’ve used Swiss Light Condensed as my font and laid it out just like in the previous Grass Text tutorial.
Part 3—The Flames
Finally, with all our preparation done, it’s time to add the actual flames! For this, we need some images of fire set against a plain black background. A good photo is hard to find, and try as I did, I couldn’t find a really great free photo. So in the end I used this photo from Fotolia which you can purchase using the link below. There was also an OK photo from Flickr which I’ve also linked to and which I ended up using later for the "E". So you might want to grab that too.AcheroN—Fotolia.com
Peasap—Flickr.com
Now the technique for copying the flames over is actually really simple. I actually only learned this technique recently when reading one of Nik Ainley‘s tutorials for DigitalArts magazine called Create Amazing Photomontages where he did it with water.
What you need to do is:
- Open up the flame image in Photoshop
- Go to the Channels tab and find the channel with the highest contrast, which for images of fire should be the Red Channel, and click on it
- This will make your image appear black and white, and because we’re on the highest contrast layer, it will seem really bright white. Now Ctrl-click this channel and it will select all the pixels in that channel.
- Click back to the RGB channel and copy the selected pixels
- You can now paste the flames into your main canvas!
Step 25
OK, so here we’ve pasted the flames on to our main canvas. (For clarity I’ve also temporarily switched off the text layers). As you can see, we’ve got the fire without the black background and it’s partially transparent, which means it’ll look super on top of our text.
Step 26
Now the next thing to do is to cut up our one bit of fire into a few pieces. Just duplicate the layer and switch off one as a backup first. Then using the Pen Tool, cut up the fire so you work with the contours of the flame so it looks natural. Here you can see I’ve produced four pieces of flame from the one image. You can also try flipping bits around to make them seem more random.Set the layers to Screen mode so that any remaining black parts are totally gone, and it’s even more transparent.
Step 27
Now because my text is just four letters, I need four separate pieces of fire. For the fourth one (on top of the E) I actually grabbed that Flickr photo and repeated the same process as earlier to create another flame. Also the fire on the letter I has been squashed a little as well to make it look more random.
Step 28
Applying the fire is really as easy as moving the flames over the text. You want to try to match the flames to the shape of the letter so it looks like they are dancing off the letters.
Step 29
OK here I’ve placed all four bits of flame over the top. It’s not bad, but you can see that the I and the R have the same flame and also all the flames aren’t very tall.
Step 30
So here I’ve gone through each flame and using the Transform Tool stretched them vertically. Also I used a bit of judicious erasing to make the flame on the I look a little more unique.
Step 31
Now to make them look even more lit up, duplicate each flame layer, run a Filters > Blur > Gaussian Blur with a Radius of 3px and set the layer to 15% Opacity so it provides a bit of glow around the edges of the flames.
Step 32
So we’re pretty much there! This is how the composition looks.
Step 33
Finally we’ll add a last highlight. So create a new layer above all the others and draw in a white to black radial gradient as shown. Set this layer to Overlay and 40% Opacity.
Finished!
And there we have it, a text on fire effect! In the next tutorial in the series, we’ll be producing the Air image, however it’ll be in two weeks, not one—as I’m taking a few days off work!If you’re interested in creating flames from scratch in Photoshop, you might also like to check out this classic tutorial that coincidentally uses the exact same typeface! It’s a Photoshop 6 tutorial, and I can still remember reading it like a half decade ago, but it’s still very relevant, even if the screenshots feature a super retro Mac interface.
Subscribe to:
Comments (Atom)
